The clamp has up to 100 pounds of clamping force, a maximum jaw opening of 6 inches, and a 2.43-inch throat. It's a great all-purpose clamp that you'll reach for over and over while working with wood or other materials. Face Clamp: These clamps are something like a pinch clamp, but with a square shape and wide pads that clamp securely without marring a delicate surface. They are useful for holding delicate pieces in place for gluing or drilling. The face clamp is best employed in metalworking tasks such as welding and sheet metal fabrication, although it can also be used to clamp other materials like wood and plastic. The Jaw Opening: The jaw opening can easily be defined as how far away the moveable jaw can move from the fixed jaw. This opening space or width between the ends of the two jaws is known as the jaw opening and it determines the clamp’s capacity.

Clamps - Appleby Woodturnings Kreg Pocket Hole Kits - Clamps - Appleby Woodturnings

The face clamp comes in different sizes for different levels of clamping and these sizes are judged by certain factors, including: The clamp features a no-slip comfort grip, which improves your hold and protects against pinching. Both arm ends have oversized pads designed to spread out clamping pressure. We also supply 90° corner KHC-90DCC and the right angle KHC-RAC clamps. If you only need lightweight clamps for occasional projects, then you'll appreciate what a bargain you get with the WORKPRO Woodworking Bar Clamp Set. There are six clamps in the set: four 6-inch clamps with a 2-3/8-inch throat and two 12-inch clamps with a 3-1/2-inch throat. All of the clamps have steel rails and heavy-duty reinforced nylon handles. Plus, all can convert into a spreader at the press of the red button. The Pressure Screw: When the jaws of the face clamp are closed, the screw can then be used to adjust the amount of pressure that is released by the jaws and onto the workpiece.There are at least 30 different types of clamps to offer various methods of applying pressure. The design of the clamp determines its type, while the material, manufacturer, and warranty of the clamp will impact its cost. The clamping faces are what set the face clamp apart from other forms of clamps as the clamping faces are very wide, ensuring the pressure is spread very thoroughly across the width of the workpiece. The width of the clamping faces also ensures that it can hold down large-sized workpieces relatively easy and can also be used to hold thin pieces in their grip.

What Is A Face Clamp? - Top Woodworking Advice What Is A Face Clamp? - Top Woodworking Advice

A face clamp is made up of several parts that enable it to secure workpieces tightly and without damage. The Throat Depth: The throat depth of the face clamp is referred to as the distance from the ends of the jaws to the edge of the handle. The throat depth determines how large a workpiece can be clamped by that specific clamp. Some face clamps are designed with longer throats so they can accommodate larger workpieces. Bar Clamp: Also called an F-clamp, due to its shape, the bar clamp opens much wider than a C-clamp, allowing you to hold much larger workpieces together. There are bar clamps as small as 6 inches, but most woodworkers find that 24 to 36 inches is the most useful for large projects. Clamps come in a wide range of sizes, allowing you to choose which best suits the size of the material you are clamping. There are a few numbers to consider when it comes to size:Pinch Clamp: Also called a hand or spring clamp, these simple clamps are useful for holding delicate materials together.

Trend Pocket Hole Jig Face Clamp Clamping Tool with Trend Pocket Hole Jig Face Clamp Clamping Tool with

You will need to use at least two clamps for most projects, but the specific number of clamps to use will vary based on the size of what you're working on and the PSI required (largely based on the type of wood you're working on).

Face clamps are typically made from steel so they are very strong and durable, and as such can withstand high pressures during the clamping operation. The face clamp has a stationary jaw on one side and a moveable jaw on the other side that is controlled by an integrated lever.

Clamps | Woodworking Tools | Screwfix Clamps | Woodworking Tools | Screwfix

The throat, which is the depth of the clamp, measuring from the frame of the clamp to the tip of its jaw. This measurement determines how far the clamp can reach into the material being held. Every woodworker's tool box should have a few of these clamps, which come in handy for holding all sorts of pieces together while glue or other adhesives dry. It is also perfect for holding metal pieces in place while being welded or drilled, or for general-purpose clamping. The large swivel pad helps reduce the risk of damage to the surface of the material being clamped.Corner Clamp: This is a specialty clamp that’s designed to hold pieces together at a 90-degree angle. It’s a very useful clamp if you are building picture frames, drawers, or similar items.