JFG RACING Motorcycle Rear Wheel Stand Portable Foldable Front And Rear Wheel Stand Paddock Stand Chain Wheel Cleaning Roller Stand Universal Motorbike (Black)

Product Information

These simple devices let you slide the dolly under the tires, and then easily move your bike around. Hi Marcelo – Yes, getting a bike on it’s center stand will be that much harder given that the platform is almost 1/2″ off the ground. The wheel and side stand holders are fitted next; no assembly or fasteners are needed for these, making it quick and easy to do. Following the directions and putting the bike up onto this was a breeze and then moving it into position for winter hibernation was also very easily done. Rick’s Reply: You could move the lever from either side, we took the video to show the lever folding down.

Cukup telusuri berbagai pilihan motorcycle lift stands terbaik dan filter berdasarkan kecocokan terbaik atau harga untuk menemukan produk yang sesuai untuk Anda! Took a bit a practice to align the center stand of my R1200RT in the right position to clear the center stand tang. The stand allows for a motorcycle to be lifted by the front steering head tube, enabling easy access for cleaning, repairs and maintenance. My pick for the best motorcycle dolly is the Condor Motorcycle Garage Dolly for Wheel Chock / Trailer Stand.

The perfect tool to move my F800gt easily and efficiently into its tight little corner of the garage.

On the BMW F 800 S (Blog) and the 2015 Kawasaki Versys 650 LT (Blog) project bikes, the lift handle just clears the rear tip of the fender with slight interference, but it works. It is virtually impossible to get the bike onto the dolly unless the bike is elevated half an inch or so (I roll the bike onto a short piece of 1×6). The U-Turn Motor Mover (aka U-Turn Mover) is a recent Acebikes design and like their other products, this one is also unique. Moving my bike is easy, without the dolly it was a chore because I would have to stick my bike close to the wall to get my truck into the garage. Easily rolls my r1250gs around the floor when in storage allowing me to keep it up against the wall or bring it out to clean/maintain.In these cases, such as with your ’99 R1100R, placing a 1/2″-3/4″ piece of wood under the rear tire makes it much easier to get the center stand onto the platform. If you look at the bikes he has on those dollies you will realize he wouldn't risk those bikes on any inferior set up. The only issue is that depending on the bike, the rear fender may interfere with the lift handle of the U-Turn Motor Mover. See our amazing range of motocross bike stands and motocross loading ramps among all the accessories and features you could possibly want to make transporting your bike a breeze.

Our brand movers are popular for taking bikes to exhibitions and trade fairs as well as for winter storage and parking. Another difference is that it easily adjusts for different motorcycle wheelbase lengths and side stand locations. I had a roller bind up and flat spot (attached to that lifting lever thing) and they sent me a whole new assembly when I just needed a replacement roller. In the video, you can clearly see the main lifting beam flex in the middle when you lift the bike up. The entire assembly requires just two 17 mm bolts and three 13 mm bolts, along with Nylock nuts and a couple of washers.It’s a handy tool for anyone storing a motorcycle in a garage, especially a garage with limited space like mine.

Like the other Acebikes stands we have reviewed, the instructions are clear line drawings and no text is needed, which reduces the need for language translations. After watching the video showing how to install the moto on this device, I was expecting to be something not too difficult.

The U-Turn Motor Mover comes in a relatively small box, with all of the parts packed extremely well in individual bubble wrap and/or plastic. Not being as young as I used to be I purchased this to let me turn my FJR In the garage and ride out without dealing with my challenging driveway. This in effect would place a lot of shear stress on the bolts used in those hinges, and/or any part of the beam material that is structurally weaker to accommodate the hinge mechanism (e. Manoeuvrability is made very easy by the large polypropylene twin-wheels which roll smoothly on any flat surface.