15mm & 22mm Grakob RCT3 Plastic Plumb Thumbs Radiator Capping Tool

Product Information

Turning your heating off is essential when carrying out any maintenance on your radiator, including removing it. It’s purely a health and safety measure as it prevents you from getting burnt. Step 2: Isolate the Radiator

But what does the radiator cap do, and how do you know when you need to replace it? I’ll break down everything you need to know here. Let’s begin with a look at the signs. Symptoms Of A Bad Radiator Cap Like all things, prevention is better than cure. Consider taking the following steps to avoid rust forming entirely. Before you get to work, there should be no heating. Once you’ve turned your thermostat off, wait for a bit and make sure the radiator is cool to the touch. You don’t want to accidentally burn yourself while removing your radiator. Do this during warmer months of the year. Dealing with cold water in the middle of winter with no heat is not a pleasant experience. Close All The Valves

Subscribe to our newsletter!

Your vehicle has a sealed cooling system, so if you had enough coolant one day, you should have enough the next. If you find that you keep adding coolant, that means your engine is either burning or leaking coolant. Regularly bleed your radiator to keep a consistent flow of water and stop old water from sitting too long. However, if you still want to DIY, then read on. Gather your tools and prep your space, because here we will go through the steps for removing a radiator Turn Off Your Heating And Wait For The Room To Cool

If you need to change valves on several radiators, your plumber will usually recommend draining the whole system first. If it’s just the one radiator, this won’t be necessary. Should I replace 40-year-old radiators?When the system is being emptied, you may also consider the use of a magnetic filter trap. This is a great way to clean the system by removing sludge and debris to increase efficiency and reduce the risk of future malfunctions. Although an inexpensive part of your radiator, the radiator cap is mostly overlooked and can cause the issues above. Permanently Capping Off a Radiator When Removing Radiator Capping off a radiator is an essential step when removing your radiator from the wall as it prevents water from your boiler from leaking onto your floors. This can be done temporarily with the help of plastic caps, however, if you’re removing your radiator permanently you will need the help of a professionally trained plumber to remove, alter and cap the pipework. Read on to find out exactly how to cap off a radiator that you are removing permanently and the purposes of a radiator cap. What Does Capping Off a Radiator Mean? Yes, but you will require the help of a professional. While they won’t usually have to drain the central heating system, the pipes may need to be capped.

If your heater is big, bulky, or very old and extra pair of helping hands can get the job done safely. Do not overestimate your strength. Radiators can get heavy. When everything is working correctly, the radiator cap does a great job at pressuring the system to raise the coolant’s boiling point. But if you have a faulty radiator cap, the coolant won’t reach the right temperature, and it can start to boil. For a deeper clean, take your radiator cleaning tool (whatever that may be), dip it in the warm soapy water, and slide it up and down between the radiator fins. Rinse the cloth and repeat this step until it comes out dust free. As above, if you don’t want to buy a radiator cleaning brush from your local hardware store, you can make one out of common household items. All you need is a long, thin object and a means of securing a cleaning cloth, duster, or sponge to it.To clean inside your radiator and around the fins (if you have a traditional design installed), you may need to take the protective grate off. There’s usually no need to remove your radiator from the wall, and all that’s required is a little ingenuity.